Toilet Paper Roll Package / Envelope / Container
Whatcha Need:
Toilet Paper Roll
7" x 6-1/2" Fabric Piece
Foam / Sponge Brush
Stapler & Staples (not shown)
Step 1: Using the foam brush, apply Mod Podge liberally to a section of the toilet paper roll and press fabric onto freshly applied section. Then, continue to "paint" the Mod Podge on the fabric as you roll it to where the fabric was first applied. You will have about 1" fabric extending from either end of the toilet paper roll ... don't worry, we'll get to that later. Set dry for 15-20 minutes.
Step 2: Fold under the fabric on either end. You may choose to Mod Podge the folded in fabric; however, it's not necessary (don't forget to dry before continuing). Pinch one end of the roll together and staple. You may have to bend the staple prongs if your stapler doesn't do it for you. Now is the time to place things inside!! After things are all inside that you want, pinch the other end and staple *in the opposite direction* (see pictures).
I'm using this one for a Bath & Body Works PocketBac to be sent in the mail ... so, I applied address labels.
No comments:
Post a Comment